Os signaling | Applied Sciences homework help

SMP5: Scheduler with Signals


This MP is a variation of SMP4.

In the last MP, we built a simulated OS process scheduler. The scheduler can

hold only a certain number of processes (workers) at one time. Once the process

has been accepted into the scheduler, the scheduler decides in what order the

processes execute. We implemented two scheduling algorithms: FIFO and Round


In this MP, we are to simulate a time-sharing system by using signals and

timers. We will only implement the Round Robin algorithm. Instead of using

iterations to model the concept of “time slices” (as in the last MP), we use

interval timers.  The scheduler is installed with an interval timer. The timer

starts ticking when the scheduler picks a thread to use the CPU which in turn

signals the thread when its time slice is finished thus allowing the scheduler

to pick another thread and so on. When a thread has completely finished its work

it leaves the scheduler to allow a waiting thread to enter. Please note that in

this MP, only the timer and scheduler send signals. The threads passively handle

the signals without signaling back to the scheduler.

The program takes a number of arguments. Arg1 determines the number of jobs

(threads in our implementation) created; arg2 specifies the queue size of the

scheduler. Arg3 through argN gives the duration (the required time slices to

complete a job) of each job. Hence if we create 2 jobs, we should supply arg3

and arg4 for the required duration. You can assume that the autograder will

always supply the correct number of arguments and hence you do not have to

detect invalid input.

Here is an example of program output, once the program is complete:

% scheduler 3 2 3 2 3

Main: running 3 workers with queue size 2 for quanta:

 3 2 3

Main: detaching worker thread 3075926960.

Main: detaching worker thread 3065437104.

Main: detaching worker thread 3054947248.

Main: waiting for scheduler 3086416816.

Scheduler: waiting for workers.

Thread 3075926960: in scheduler queue.

Thread 3075926960: suspending.

Thread 3065437104: in scheduler queue.

Thread 3065437104: suspending.

Scheduler: scheduling.

Scheduler: resuming 3075926960.

Thread 3075926960: resuming.

Scheduler: suspending 3075926960.

Scheduler: scheduling.

Scheduler: resuming 3065437104.

Thread 3065437104: resuming.

Thread 3075926960: suspending.

Scheduler: suspending 3065437104.

Scheduler: scheduling.

Scheduler: resuming 3075926960.

Thread 3075926960: resuming.

Thread 3065437104: suspending.

Scheduler: suspending 3075926960.

Scheduler: scheduling.

Scheduler: resuming 3065437104.

Thread 3065437104: resuming.

Thread 3075926960: suspending.

Scheduler: suspending 3065437104.

Thread 3065437104: leaving scheduler queue.

Scheduler: scheduling.

Scheduler: resuming 3075926960.

Thread 3075926960: resuming.

Thread 3065437104: terminating.

Thread 3054947248: in scheduler queue.

Thread 3054947248: suspending.

Scheduler: suspending 3075926960.

Thread 3075926960: leaving scheduler queue.

Scheduler: scheduling.

Scheduler: resuming 3054947248.

Thread 3054947248: resuming.

Thread 3075926960: terminating.

Scheduler: suspending 3054947248.

Scheduler: scheduling.

Scheduler: resuming 3054947248.

Thread 3054947248: suspending.

Thread 3054947248: resuming.

Scheduler: suspending 3054947248.

Scheduler: scheduling.

Scheduler: resuming 3054947248.

Thread 3054947248: suspending.

Thread 3054947248: resuming.

Scheduler: suspending 3054947248.

Thread 3054947248: leaving scheduler queue.

Thread 3054947248: terminating.

The total wait time is 12.062254 seconds.

The total run time is 7.958618 seconds.

The average wait time is 4.020751 seconds.

The average run time is 2.652873 seconds.

The goal of this MP is to help you understand (1) how signals and timers work,

and (2) how to evaluate the performance of your program. You will first

implement the time-sharing system using timers and signals. Then, you will

evaluate the overall performance of your program by keeping track of how long

each thread is idle, running, etc.

The program will use these four signals:

SIGALRM: sent by the timer to the scheduler, to indicate another time

  quantum has passed.

SIGUSR1: sent by the scheduler to a worker, to tell it to suspend.

SIGUSR2: sent by the scheduler to a suspended worker, to tell it to resume.

SIGTERM: sent by the scheduler to a worker, to tell it to cancel.

You will need to set up the appropriate handlers and masks for these signals.

You will use these functions:










Also, make sure you understand how the POSIX:TMR interval timer works.

There are two ways you can test your code.  You can run the built-in grading

tests by running “scheduler -test -f0 rr”.  This runs 5 tests, each of which can

be run individually.  You can also test you program with specific parameters by

running “scheduler -test gen …” where the ellipsis contains the parameters you

would pass to scheduler.



Part I: Modify the scheduler code (scheduler.c)


We use the scheduler thread to setup the timer and handle the scheduling for the

system.  The scheduler handles the SIGALRM events that come from the timer, and

sends out signals to the worker threads.

Step 1.

Modify the code in init_sched_queue() function in scheduler.c to initialize the

scheduler with a POSIX:TMR interval timer. Use CLOCK_REALTIME in timer_create().

The timer will be stored in the global variable “timer”, which will be started

in scheduler_run() (see Step 4 below).

Step 2.

Implement setup_sig_handlers().  Use sigaction() to install signal handlers for

SIGALRM, SIGUSR1, and SIGTERM.  SIGALRM should trigger timer_handler(), SIGUSR1

should trigger suspend_thread(), and SIGTERM should trigger cancel_thread().

Notice no handler is installed for SIGUSR2; this signal will be handled

differently, in step 8.

Step 3.

In the scheduler_run() function, start the timer.  Use timer_settime().  The

time quantum (1 second) is given in scheduler.h.  The timer should go off

repeatedly at regular intervals defined by the timer quantum.

In Round-Robin, whenever the timer goes off, the scheduler suspends the

currently running thread, and tells the next thread to resume its operations

using signals. These steps are listed in timer_handler(), which is called every

time the timer goes off.  In this implementation, the timer handler makes use of

suspend_worker() and resume_worker() to accomplush these steps.

Step 4.

Complete the suspend_worker() function.  First, update the info->quanta value.

This is the number of quanta that remain for this thread to execute.  It is

initialized to the value passed on the command line, and decreases as the thread

executes.  If there is any more work for this worker to do, send it a signal to

suspend, and update the scheduler queue.  Otherwise, cancel the thread.

Step 5.

Complete the cancel_worker() function by sending the appropriate signal to the

thread, telling it to kill itself.

Step 6.

Complete the resume_worker() function by sending the appropriate signal to the

thread, telling it to resume execution.

Part II: Modify the worker code (worker.c)


In this section, you will modify the worker code to correctly handle the signals

from the scheduler that you implemented in the previous section.

You need to modify the thread functions so that it immediately suspends the

thread, waiting for a resume signal from the scheduler. You will need to use

sigwait() to force the thread to suspend itself and wait for a resume signal.

You need also to implement a signal handler in worker.c to catch and handle the

suspend signals.

Step 7.

Modify start_worker() to (1) block SIGUSR2 and SIGALRM, and (2) unblock SIGUSR1


Step 8.

Implement suspend_thread(), the handler for the SIGUSR1 signal.  The

thread should block until it receives a resume (SIGUSR2) signal.

Part III: Modify the evaluation code (scheduler.c)


This program keeps track of run time, and wait time.  Each thread saves these

two values regarding its own execution in its thread_info_t.  Tracking these

values requires also knowing the last time the thread suspended or resumed.

Therefore, these two values are also kept in thread_info_t.  See scheduler.h.

In this section, you will implement the functions that calculate run time and

wait time.  All code that does this will be in scheduler.c.  When the program

is done, it will collect all these values, and print out the total and average

wait time and run time.  For your convenience, you are given a function

time_difference() to compute the difference between two times in microseconds.

Step 9.

Modify create_workers() to initialize the various time variables.

Step 10.

Implement update_run_time().  This is called by suspend_worker().

Step 11.

Implement update_wait_time().  This is called by resume_worker().



Question 1.

Why do we block SIGUSR2 and SIGALRM in worker.c?  Why do we unblock SIGUSR1 and

SIGTERM in worker.c?

Question 2.

We use sigwait() and sigaction() in our code. Explain the difference between the

two. (Please explain from the aspect of thread behavior rather than syntax).

Question 3.

When we use POSIX:TMR interval timer, we are using relative time. What is the

alternative? Explain the difference between the two.

Question 4.

Look at start_worker() in worker.c, a worker thread is executing within an

infinite loop at the end. When does a worker thread terminate?

Question 5.

When does the scheduler finish?  Why does it not exit when the scheduler queue

is empty?

Question 6.

After a thread is scheduled to run, is it still in the sched_queue? When is it

removed from the head of the queue? When is it removed from the queue completely?

Question 7.

We’ve removed all other condition variables in SMP4, and replaced them with a

timer and signals. Why do we still use the semaphore queue_sem?

Question 8.

What’s the purpose of the global variable “completed” in scheduler.c? Why do we

compare “completed” with thread_count before we wait_for_queue() in


Question 9.

We only implemented Round Robin in this SMP. If we want to implement a FIFO

scheduling algorithm and keep the modification as minimum, which function in

scheduler.c is the one that you should modify? Briefly describe how you would

modify this function.

Question 10.

In this implementation, the scheduler only changes threads when the time quantum

expires.  Briefly explain how you would use an additional signal to allow the

scheduler to change threads in the middle of a time quantum.  In what situations

would this be useful?

Get 20% Discount on This Paper
Pages (550 words)
Approximate price: -

Try it now!

Get 20% Discount on This Paper

We'll send you the first draft for approval by at
Total price:

How it works?

Follow these simple steps to get your paper done

Place your order

Fill in the order form and provide all details of your assignment.

Proceed with the payment

Choose the payment system that suits you most.

Receive the final file

Once your paper is ready, we will email it to you.

Our Services

Assignment Help has assembled a team of highly skilled writers with diverse experience in the online writing circles. Our aim is to become a one stop shop for all your Academic/ online writing. Check out below our amazing service!


Essay Writing Services

At Assignment Help, we prioritize on all aspects that creates a good grade such as impeccable grammar, proper structure, zero-plagiarism, and conformance to guidelines. The principal purpose of essay writing is to present the author's evaluation concerning a singular subject about which they have made. Since Professionalism is the mother of every success, try our team of experienced writers in helping you complete your essays and other assignments.


Admission Papers

You have been trying to join that prestigious institution you long yearned for, but the hurdle of an admission essay has become a stumbling block. We have your back, with our proven team that has gained invaluable experience over time, your chance of joining that institution is now! Just let us work on that essay.How do you write an admission essay? How do you begin the essay? For answers, try Quality Custom Writers Now!


Editing and Proofreading

Regardless of whether you're pleased with your composing abilities, it's never an impractical notion to have a second eye go through your work. The best editing services leaves no mistake untouched. We recognize the stuff needed to polish up a writing; as a component of our editing and proofreading, we'll change and refine your write up to guarantee it's amazing, and blunder free. Our group of expert editors will examine your work, giving an impeccable touch of English while ensuring your punctuation and sentence structures are top-notch.


Technical papers

We pride ourselves in having a team of clinical writers. The stringent and rigorous vetting process ensures that only the best persons for job. We hire qualified PhD and MA writers only. We equally offer our team of writers bonuses and incentives to motivate their working spirit in terms of delivering original, unique, and informative content. They are our resources drawn from diverse fields. Therefore your technical paper is in the right hands. Every paper is assessed and only the writers with the technical know-how in that field get to work on it.


College Essay Writing

If all along you have been looking for a trustworthy college essay service provider that provides superb academic papers at reasonable prices, then be glad that you search has ended with us. We are your best choice! Get high-quality college essay writing from our magnificent team of knowledgeable and dedicated writers right now!


Quality Assignment/Homework Help

We give the students premium quality assignments, without alarming them with plagiarism and referencing issues. We ensure that the assignments stick to the rules given by the tutors. We are specific about the deadlines you give us. We assure you that you will get your papers well in advance, knowing that you will review and return it if there are any changes, which should be incorporated.